Conveyor chain

A conveyor chain is chain that is designed particularly for chain conveyor systems. It consists of a number of journal bearings that are kept together by constraining hyperlink plates. Each bearing consists of a pin and a bush which the chain roller revolves.
1. Hollow bearing pin chain
Hollow bearing pin chain allows attachments to be bolted through the hollow bearing pins. Attachments may be tightly fixed or held in a ‘free’ manner.
2. Solid bearing pin chain
Solid bearing pin chain gets the same dimensions as hollow bearing pin chain but is better quality and thus ideal for more arduous conveyor applications.
3. Deep link chain
Deep link chain has deeper side plates than the normal chain plates therefore provides a constant carrying edge over the roller periphery. Deep hyperlink chain comes in solid and hollow bearing pin varieties.
4. Drop forged chain
Drop forged chain (also called en-masse conveyor chain or scraper chain) is already fitted with attachments which have been welded directly onto the chain links
Conveyor series roller chains are one of the most trusted types of chains in the globe. Because of this, we stock nearly every size and configuration which range from ANSI, DIN, and ISO authorized series chains. We also have a full line of stainless conveyor chains as well as hollow-pin conveyor roller chains.
The most common style of conveyor chain is called double pitch roller chain. The reason being it conforms to ANSI B29.1 specifications and can retrofit most applications. It also offers a low weight to high-strength ratio, an extended service life in most applications, and has a wide selection of attachments available. There are two common varieties of this chain. The first is the one demonstrated in the picture above on the still left, the second reason is the picture above on the right. The photo on the right is oversized-roller double pitch conveyor chain. This is used because the rollers extend at night side plates creating a simple way to mention content in one location to the next. These chains are usually designated with a 2 in place of the second 0 in the part numbers for these chains. Example, C2050 chain may be the standard series and C2052 chain gets the oversized rollers.
Note: Most double pitch conveyor roller chains are stock in 10ft boxes, 50ft reels, and 100ft reels. Specific cut to size strands and attachments are availble upon request.


The next most common design of conveyor roller chain is known as the straight side plate or sidebar roller chain. This series fully match ANSI and ISO metric dimensionally with the exception of having straight aspect plates. Having straight side plates makes this roller chain be capable of carry the product along with it evenly.
· 1
Conveyor chain can handle various goods and system in many fields.
· 2
We are providing a wide range of Conveyor chain in proportions and feature.
· 3
We are offering best suitable Conveyor chain for your environment of usage
Small Conveyor Chain
Attachment Roller Chain is regular roller chain with attachment assembled.
Attachment Stainless Roller Chain

Attachment Stainless Roller Chain is Stainless Roller Chain with attachment assembled as needed.
Double Pitch Roller Chain

Double Pitch Roller Chain is definitely divided into the large roller series and the tiny roller series, according to the external diameter of the rollers utilized.
Attachment Dual Pitch Roller Chain

Attachment Double Pitch Roller Chain is Double Pitch Roller Chain with attachment assembled.
Double Pitch Stainless Steel Roller Chain

Dual Pitch Stainless Roller Chain could work well under challenging atmosphere and circumstance which needs high corrosion and heat resistance.
Attachment Dual Pitch Stainless Roller Chain

Attachment Dual Pitch Roller Chain has oval type hyperlink plate.
Hollow Pin Chain

Hollow Pin Chain has hollow pin which allows various sort of pins or attachment match.
Top Roller Chain

Top Roller Chain may carry goods at the top roller allowing stopping or holding goods whilst chain keeps running.
Side Roller Chain

Side Roller Chain has two kinds of Roller assembly, a single is mating and another is staggered. In either case plastic roller can help reducing noise.
Waste Oven Conveyor Chain

As being is utilized under serious condition, such as ash and water, Waste materials Oven Conveyor Chain is provided special design for higher wear level of resistance.
Case Conveyor Chain

Case conveyor runs the chain inside a casing to mention loads. It can run vertically or on an incline, and also horizontally.
§ Material:
§ Configuration:
§ Other characteristics:
• Wide variety of products
• Measurements according to ISO 1275
• Versions with small rollers and transportation rollers available
• All ELITE chain plates 1 are manufactured using processes
such as fine blanking and ball-drifting, so an especially high

Product range:
• Double pitch roller chains ISO 1275
• Double pitch roller chains with directly plates ISO 1275
• Double pitch hollow pin bushed chains
• Dual pitch hollow pin roller chains contact ratio is guaranteed.
• Solid, case hardened rollers 2 with good wear resistance
• ELITE pins 3 are smooth and also have an extra hard surface for increased wear resistance
Model article number:

iwis Leaf chains (in accordance to works standard) are created from accuracy chain parts according to ISO 606. They could be customized and are compliant with the EC Machinery Directive 2006/42/EC.

– iwis hyperlink plates with high tensile strengths
– Pins with extra hardened surface for high wear resistance
– Precision-formed, heat-treated and shot-peened link plates with optimised geometry
– Higher breaking forces attained by optimised plate thickness
– Improved press-fitting of pins and outer plates for higher exhaustion strength
– Link plates with a particularly high contact ratio
– Pins with hardened surfaces for increased wear resistance
– Special versions manufactured to works standards available
Model article number: –

Using Ever-power belt signing up for strand during set up will significantly extend your belt lifestyle! Belt installations that are rushed and improperly made are often the cause of belt breakage and downtime. Ever-power is a pre-formed, pre-bent becoming a member of strand that will require no bending or weaving during set up. This helps to avoid any weak areas in the belt joint.