Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still hooked up however the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Application Notice” below for make use of in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). In the event that you order several motor at a time, we will do our best to supply your purchase with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric motor and designed to have continuous ventilation over the motor casing for electric fan motor china cooling. The housing isn’t vented and the electric electric motor 
will overheat and get into automatic thermal overload if operate in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric electric motor is produced in China.