When the application requires a direct and solid shaft connection and that shaft misalignments during procedure are minimal, then your ABR solid or rigid type couplings may be used. To suit shafts from 6mm up to 50mm in coupling China diameter as standard.
A good compression-type coupling or rigid coupling since it is sometimes termed has no versatility but can effectively be used to connect two shafts to make a permanent joint. The solid coupling is generally designed to manage to transmitting the full torque load capacity of the shaft.
Ever-power stocks a wide range of solid (muff) design shaft coupling for fast easy shaft connection. Ideal for 6mm to 50mm size shafts, the anodised steel construction is made for arduous use. Merely release the clamp style design by removing the four bolts, fit the coupling and reapply the bolts to a set torque to attain reliable shaft connection. Keeping tight tolerances to the concentricity on the bore, makes the Ever-power rigid coupling a perfect emergency repair or prototype connection.
By precisely aligning the two shafts and keeping them firmly in place, rigid couplings help maximize performance and boost the expected lifestyle of the device. These rigid couplings can be found in two basic styles to fit the needs of different applications. Sleeve-style couplings will be the most affordable and easiest to make use of, whilst clamped or compression rigid couplings can be found in two parts and suit together around the shafts to create a sleeve. Both types can be found from Ever-power suiting shaft sizes from 6mm up to 50mm in size.
One and Two piece ABR rigid couplings – Two distinct styles are available. The main one and two piece series couplers possess superior holding power and maintain alignment. The one piece versions are supplied with four clamping screws. Both piece split edition couplers can be installed and taken out without machine dis-assembly. Given eight clamping screws, they offer reliable holding power and keep maintaining alignment.
Precision Rigid couplings can be found as regular in aluminium alloy and stainless steel. For smaller sized shaft sizes the new SC series clamping technique that ensures the concentricity of the clamped shaft. Suited to shaft sizes from 3mm to 15mm diameter, including imperial and custom formats, make the brand new SC series perfect for applications where high torque and remarkable torsional stiffness are required.
Exceptional torsional stiffness
High torque capacity
Metric and Imperial bore formats
Integral clamp shaft attachment
If you require further complex information, please usually do not hesitate to get hold of our sales engineers who will be more than pleased to help you together with your selection.
Ever-power’s Rigid couplings are ribbed-type compression couplings that are recommended for emergency and regular support in heavily loaded shafts. These couplings are bored true to shaft size, and the halves are separated through the boring operation to permit for clamping when the halves are drawn collectively.
Bolt heads and nuts protected by flanges
Bored accurate to shaft size
Recommended for crisis and regular service upon heavily loaded shafts
Outer diameters turned
End flanges faced square to bore